|
| |
TM 9-2320-364-20-4
12-138
12-29. AIR RESERVOIR NO. 3 REPLACEMENT (CONT).
(16)
Install air reservoir bracket (16), fuel shut
off valve mounting bracket (31), screw (30)
and locknut (29) on frame (28).
(17)
Install air reservoir bracket (16), screw (27)
and locknut (26) on frame (28).
(18)
Position four air reservoir mounting
brackets (19), four screws (18), two cushion
clips (25) and four locknuts (17) on two air
reservoir brackets (16).
(19)
With the aid of an assistant, position drain
valve cable (24) and air reservoir (23) in
four air reservoir mounting brackets (19).
NOTE
When assembling air reservoirs
and mounting brackets, do not
over tighten nut and lockwasher.
Tighten nut until lockwasher is
fully compressed.
(20)
With the aid of an assistant, install two
screws (22), lockwashers (21) and nuts (20)
in reservoir mounting bracket (19). Tighten
nuts until lockwasher is fully compressed.
(21)
Tighten four locknuts (17) on brackets (19).
(22)
Install two mounting clips (15),
washers (14), lockwashers (13) and
screws (12) on two air reservoir
brackets (16).
|
