|
| |
TM 9-2320-364-20-4
12-142
12-30. AIR RESERVOIR NO. 4 REPLACEMENT (CONT).
NOTE
Note location and position of
elbows prior to removal.
(9)
Position air reservoir (16) in soft jawed vise.
(10)
Remove plug (20) from air reservoir (16).
(11)
Remove elbow (2) from air reservoir (16).
(12)
Remove elbow (4) from air reservoir (16).
(13)
Remove drain valve (21) from air
reservoir (16).
(14)
Remove air reservoir (16) from soft jawed
vise.
b.
Cleaning/Inspection.
(1)
Clean sealant from pipe threads.
(2)
Inspect threads, fittings and tank for cracks, broken welds and stripped threads.
(3)
Replace all damaged parts.
c.
Installation.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Install elbows as noted prior to removal.
(1)
Position air reservoir (16) in soft jawed vise.
(2)
Apply sealing compound to threads of drain valve (21).
(3)
Install drain valve (21) in air reservoir (16).
(4)
Apply sealing compound to threads of elbow (4).
(5)
Install elbow (4) in air reservoir (16).
(6)
Apply sealing compound to threads of elbow (2).
(7)
Install elbow (2) in air reservoir (16).
(8)
Apply sealing compound to threads of pipe plug (20).
(9)
Install pipe plug (20) in air reservoir (16).
(10)
Remove air reservoir (16) from soft jawed vise.
|
