|
| |
TM 9-2320-364-20-4
12-143
(11)
Install two air reservoir brackets (9),
screws (18) and locknuts (17) on frame
(19).
(12)
Position four air reservoir mounting
brackets (12), screws (11) and locknuts (10)
on air reservoir bracket (9).
(13)
Position air reservoir (16) in four air
reservoir mounting brackets (12).
NOTE
When assembling air reservoirs
and mounting brackets, do not
over tighten nut and lockwasher.
Tighten nut until lockwasher is
fully compressed.
(14)
Install two screws (15), lockwashers (14)
and nuts (13) in four air reservoir mounting
brackets (12).
(15)
Tighten four locknuts (10) and screws (11)
on brackets (12).
(16)
Install two mounting clips (8), washers (7),
lockwashers (6) and screws (5) on air
reservoir brackets (9).
|
