|
| |
TM 9-2320-364-20-4
12-206
12-43. GLADHAND REPLACEMENT (CONT).
(5)
Remove nut (7) and lockwasher (8) from
reducer (9). Discard lockwasher.
(6)
Remove gladhand (2) and reducer (9) from
bracket (10).
(7)
Remove reducer (9) from gladhand (2).
NOTE
Perform Step (8) if dummy
coupling is damaged or if
replacing bracket.
(8)
Bend open end of chain S-hook (11) and
remove dummy coupling (1) from bracket (10)
b.
Installation.
NOTE
Perform Step (1) if dummy
coupling was removed.
(1)
Install chain S-hook (11) of dummy coupling
(1) in bracket (10). Crimp end of S-hook
(11) closed.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
Front and rear gladhands are
installed the same way. Left rear
shown.
(2)
Apply sealing compound on threads of
reducer (9).
(3)
Install reducer (9) on gladhand (2).
(4)
Install gladhand (2) and reducer (9) on
bracket (108) with lockwasher (8) and nut
(7).
|
