|
| |
TM 9-2320-364-20-4
12-207
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(5)
Apply sealing compound on threads of
connector (6).
(6)
Install connector (6) on gladhand (2).
(7)
Install air line 2653 (5) on connector (6).
NOTE
Perform Step (8) only if seal (3)
or screen (4) were removed.
(8)
Install screen (4) and seal (3) on gladhand
(2).
(9)
Install dummy coupling (1) on gladhand (2).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Build up air pressure to 125 psi (861 kPa).
Shut OFF engine, (TM 9-2320-364-10).
Check for air leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
