|
| |
TM 9-2320-364-20-4
12-209
b.
Installation.
(1)
With the aid of an assistant, install
bracket (4) on rear crossmember (7) with
two screws (6) and locknuts (5).
(2)
Install screw (3) and cushion clip (2) on
bracket (4) with locknut (1). Tighten
locknut to 75 lb-in (8 N.m).
NOTE
Perform Step (3) if nameplate
was removed.
(3)
Install nameplate (9) on bracket (4) with two
drive screws (8).
c.
Follow-On Maintenance:
Install emergency air quick disconnect, (Para 12-42).
Install gladhand, (Para 12-43).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
