|
| |
TM 9-2320-364-20-4
3-5
Materials/Parts
Lubricating Oil, Engine (Item 56, Appendix C)
Rags, Wiping (Item 67, Appendix C)
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Left side noise panel removed, (Para 17-28)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Compressor Unit, Air (Item 11, Appendix G)
Gloves, Chemical Oil Protective
(Item 28, Appendix G)
Goggles, Industrial (Item 30, Appendix G)
Gun, Air Blow (Item 31, Appendix G)
Socket Set, 3/8 in. (Item 62, Appendix G)
Wrench, Torque (0 to 60 N.m)
(Item 98, Appendix G)
3-4. LEFT ROCKER COVER AND GASKET REPLACEMENT.
Materials/Parts - Continued
Solvent, Drycleaning (Item 87, Appendix C)
Clamp, Hose (2) (Item 19, Appendix F)
Clamp, Hose (3) (Item 20, Appendix F)
Element (Item 34, Appendix F)
Gasket (Item 54, Appendix F)
Screw (3) (Item 297, Appendix F)
Seal (Item 326, Appendix F)
Seal (Item 330, Appendix F)
a.
Removal.
Clean around rocker cover prior
to removal from engine to keep
dust or dirt from entering engine.
Failure to comply may result in
damage to equipment.
(1)
Open engine cover (1).
(2)
Remove hose 2600 (2) from fitting (3) on air
intake pipe assembly (4).
(3)
Disconnect MC67 connector (5).
(4)
Remove hose 2381 (6) from fitting (7) on air
intake pipe assembly (4).
|
