|
| |
TM 9-2320-364-20-4
3-27
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use only with
effective chip guarding and personal protective equipment (goggles/shield, gloves, etc) or
injury to personnel may result.
(2)
Dry parts with compressed air.
(3)
Inspect parts for cracks, gouges or pitting.
(4)
Replace all damaged parts.
d.
Assembly.
(1)
Position remote engine oil filter manifold
(1) in soft jawed vise.
Use care when removing springs.
Springs are under tension and
can act as projectiles when
released and could cause injury
to personnel.
(2)
Install valve disk (6), spring (5), washer (4)
and plug (3) in remote engine oil filter
manifold (1).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(3)
Apply sealing compound to threads of
adapter (2).
NOTE
Adapter in Step (4) is installed in
bottom port marked “IN” and
facing down.
(4)
Install adapter (2) in remote engine oil filter
manifold (1).
(5)
Remove remote engine oil filter manifold
(1) from vise.
1
2
3
4
6
5
|
