|
| |
TM 9-2320-364-20-4
4-73
Ensure fuel filter head is
supported when removing two
screws or fuel filter head may fall
and damage may occur.
(4)
Remove two screws (8) from fuel filter
head (3) and engine block (9).
(5)
Remove fuel filter line (10) from fitting (11).
(6)
Remove fuel filter head (3) from engine
block (9).
NOTE
Note and record location and
position of all fittings and elbows
prior to removal.
(7)
Remove fittings (2), (5), (7) and (11) from
fuel filter head (3).
(8)
Remove elbow (12) from fuel filter head (3).
b.
Installation.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Ensure all fittings and elbow are installed in same location and position as during removal.
(1)
Apply sealing compound to elbow (12).
(2)
Install elbow (12) in fuel filter head (3).
(3)
Apply sealing compound to fittings (2), (5), (7) and (11).
(4)
Install fittings (2), (5), (7) and (11) in fuel filter head (3).
|
