|
| |
TM 9-2320-364-20-4
4-74
4-14. SECONDARY FUEL FILTER HEAD REPLACEMENT (CONT).
Ensure fuel filter head is fully
supported until after Step (5) or
fuel filter head may fall and
damage may occur to parts.
(5)
Position fuel filter head (3) on engine
block (9).
(6)
Install fuel filter Line (10) on fitting (11) of
fuel filter head (3).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(7)
Coat threads of two screws (8) with sealing
compounds.
(8)
Position fuel filter head (3) on engine
block (9) and secure with two screws (8).
Tighten screws to 23 lb-ft (31 N.m).
(9)
Install fuel filter line (6) on fitting (7) of fuel
filter head (3).
(10)
Install fuel filter line (4) on fitting (5) of
fuel filter head (3).
(11)
Install fuel filter line (1) on fitting (2) of
fuel filter head (3).
|
