|
| |
TM 9-2320-364-20-4
4-80
4-16. FUEL/WATER SEPARATOR AND BRACKET REPLACEMENT (CONT).
(4)
Remove hose 2922 (6) and hose 2920 (7)
from tee (8).
(5)
Disconnect hose 2259 (9) from elbow (10).
(6)
Remove locknut (11), screw (12), cushion
clip (13) and hose 2259 (9) from
bracket (14). Discard locknut.
(7)
Remove hose 2261 (15) from elbow (16).
(8)
Remove hose 2921 (17) from elbow (18).
(9)
Remove hose 2920 (7) from elbow (19).
(10)
Remove hose 2919 (20) from elbow (21).
NOTE
Perform Step (11) if truck is
equipped with air dryer guard.
(11)
Support air dryer guard, remove
remaining three locknuts (11),
screws (12) and slide bracket (14)
from between bracket (22) and air
dryer guard bracket (23). Discard
locknuts.
(12)
Remove remaining three locknuts (11),
screws (12) and bracket (14) from
bracket (22). Discard locknuts.
|
