|
| |
TM 9-2320-364-20-4
4-82
4-16. FUEL/WATER SEPARATOR AND BRACKET REPLACEMENT (CONT).
NOTE
Do not install upper outside
locknut and screw. It will be
installed in Step (13).
Perform Step (6) if air dryer
guard is on truck.
(6)
Install bracket (14) between bracket (22)
and air dryer guard bracket (23) with
three screws (12) and locknuts (11).
(7)
Install bracket (14) on bracket (22) with
three screws (12) and locknuts (11).
(8)
Install hose 2919 (20) on elbow (21).
(9)
Install hose 2920 (7) on elbow (19).
(10)
Install hose 2921 (17) on elbow (18).
(11)
Install hose 2261 (15) on elbow (16).
(12)
Install hose 2559 (9) on elbow (10).
(13)
Install hose 2259 (9) on bracket (14) with
cushion clip (13), screw (12) and
locknut (11).
(14)
Install hose 2922 (6) and hose 2920 (7) on
tee (8).
|
