|
| |
TM 9-2320-364-20-4
4-91
(4)
Route ether tube (1) through two engine
wire harness clips (5).
NOTE
Install cable ties as required.
(5)
Cut ether tube (1) to correct length.
(6)
Position nut (3) and ferrule (4) on ether
tube (1).
(7)
Install ether tube (1) on valve assembly (2).
c.
Follow-On Maintenance:
Connect ether start aid assembly, (Para 4-18).
Install right side noise panel, (Para 17-26).
Install left side noise panel, (Para 17-28).
Start engine, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
