|
| |
TM 9-2320-364-20-4
6-11
Ensure check manifold is
supported upon removal of four
screws. Check manifold will fall
when four screws are removed
and damage to equipment may
result.
(20)
Remove four screws (57) and
lockwashers (58), two adapters (59), hose
2771 (60) and preformed packing (61)
from outlet side of check manifold (56).
Discard lockwashers and preformed
packing.
(21)
Remove check manifold (56) and two
preformed packings (62) and (63) from fan
motor (64). Discard preformed packings.
Cooling assembly weighs 925 lbs
(420 kg). Attach suitable lifting
device for removal and properly
support cooling assembly to
prevent possible injury to
personnel.
(22)
Attach lifting device to four lifting eyes (65)
on cooling assembly (66).
(23)
Remove and discard four locknuts (67) from
radiator support brackets (68).
(24)
Remove screw (69), lockwasher (70),
washer (71) and muffler support
bracket (72) from muffler (73) and radiator
support bracket (68). Discard lockwasher.
|
