|
| |
TM 9-2320-364-20-4
6-12
6-3. COOLING SYSTEM ASSEMBLY REPLACEMENT (CONT).
(25)
With the aid of an assistant, remove cooling assembly (66) from radiator support brackets (68) and
position four jackstands.
(26)
Remove lifting device from lifting eyes (65) on cooling assembly (66).
b.
Installation.
Cooling assembly weighs 925 lbs
(420 kg). Attach lifting device
for installation and properly
support cooling assembly to
prevent possible injury to
personnel.
NOTE
Install cable ties in locations
noted prior to removal.
Remove all caps and plugs
prior to installation of hoses
and tubes.
(1)
Attach lifting device to four lifting eyes (65)
on cooling assembly (66).
(2)
With the aid of an assistant, position cooling
assembly (66) on radiator support
brackets (68).
(3)
Install muffler support bracket (72) on
muffler (73) and radiator support
bracket (68) with washer (71),
lockwasher (70) and screw (69).
(4)
Install four locknuts (67) on radiator
support brackets (68).
(5)
Remove lifting device from four lifting
eyes (65) on cooling assembly (66).
|
