|
| |
TM 9-2320-364-20-4
6-27
(20)
Remove eight locknuts (38) and screws
(39) from four side brackets (40). Discard
locknuts.
NOTE
Aspirator hose is matchmarked to
clips to ensure length of hose will
be correct during installation.
(21)
Matchmark position of aspirator hose (41)
to clips (42).
(22)
Remove two screws (43),
lockwashers (44), washers (45), clips (42)
and aspirator hose (41) from left side of
radiator assembly (35). Discard
lockwashers.
Ensure grille assembly is fully
supported by lifting device prior
to removal of screws in Step (23).
Failure to comply may result in
severe injury to personnel.
(23)
Remove two screws (46), lockwashers (47)
and washers (48) from side brackets (40)
on left side of radiator assembly (35).
Discard lockwashers.
(24)
Remove four screws (46), lockwashers (47)
and washers (48) from two side brackets (40)
on right side of radiator assembly (35).
Discard lockwashers.
|
