|
| |
TM 9-2320-364-20-4
6-47
(4)
Install hose (16) and two clamps (15) on
right thermostat housing (17).
(5)
Install thermostat (14) in right thermostat
housing (17).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(6)
Apply sealing compound on threads of
elbow (26).
(7)
Install elbow (26) in right thermostat
housing (17).
Adhesive causes immediate
bonding on contact with eyes,
skin, or clothing and also gives
off harmful vapors. Wear
protective goggles and use in
well-ventilated area. If adhesive
gets in eyes, try to keep eyes
open; flush eyes with water for
15 minutes and get immediate
medical attention.
(8)
Apply adhesive sealant sparingly to
gasket (34).
(9)
Position gasket (34) on right thermostat
housing (17).
(10)
Position lockwasher (33) and screw (32) in
right thermostat housing (17).
|
