|
| |
TM 9-2320-364-20-4
7-5
(2)
Remove nut (8), lockwasher (9) and wires
1820 (10) and 1278 (11) from positive
terminal (12). Discard lockwasher.
(3)
Remove nut (13), lockwasher (14) and wires
1953 (15) and 1344 (16) from F-positive
terminal (17). Discard lockwasher.
(4)
Loosen nut (18) on alternator support
arm (19).
(5)
Remove screw (20), lockwasher (21) and
washer (22) from eye rod end (23) on
alternator support arm (19). Discard
lockwasher.
(6)
Remove nut (18), lockwasher (24), eye rod
end (23) and nut (18) from alternator
support arm (19). Discard lockwasher.
NOTE
Note number of washers prior to
removal.
(7)
Remove screw (25), lockwasher (26),
alternator support arm (19) and washers (27)
from engine (28). Discard lockwasher.
(8)
Remove and discard locknut (29) from
screw (30).
(9)
Rotate alternator (31) towards center of
engine (28) and remove two belts (32)
alternator (31).
NOTE
There may or may not be
washer(s) used in Step (10).
Note position of washer(s)
prior to removal.
(10)
Remove screw (30), washer(s) (33) and
alternator (31) from alternator mounting
bracket (34).
|
