|
| |
TM 9-2320-364-20-4
7-8
7-2. ALTERNATOR REPLACEMENT (145 AMP) (CONT).
NOTE
Install same number of washers
as removed.
(13) Position washers (27) and alternator support
arm (19) on engine (28) with
lockwasher (26) and screw (25).
(14) Position nut (18), eye rod end (23),
lockwasher (24) and nut (18) on alternator
support arm (19).
(15)
Position washer (22), lockwasher (21) and
screw (20) in eye rod end (23) and alternator
support arm (19).
(16)
Tighten screw (25) on alternator support
arm (19) 137 to 147 lb-ft (186 to 199 N.m).
(17)
Tighten screw (20) on alternator (31) 50 to
55 lb-ft (68 to 75 N.m).
(18)
Position belt tensioning gage on belts (32).
(19)
Tighten nut (18) on alternator support
arm (19) until alternator belts tension
reaches 55 to 65 lbs (245 to 289 N).
(20)
Tighten nut (18) on alternator support
arm (19) to 75 lb-ft (102 N.m).
(21)
Remove belt tensioning gage from
belts (32).
(22)
Tighten locknut (29) on screw (30) and
alternator mounting bracket (34) 95 to
105 lb-ft (129 to 142 N.m).
|
