|
| |
TM 9-2320-364-20-4
7-7
(6)
Position key (37), pulley (35) and
locknut (36) on alternator (31). Do not
tighten.
(7)
Position pulley (35) in soft-jawed vise.
(8)
Tighten locknut (36) on alternator (31) 70
to 80 lb-ft (95 to 108 N.m).
(9)
Remove pulley (35) from vise.
NOTE
There may or may not be
washer(s) used in Step (10).
Install washer(s) as noted
prior to removal.
(10)
Position alternator (31) on alternator
mounting bracket (34) and install washer(s)
(33) and screw (30) in bottom of alternator
(31).
(11)
Rotate alternator (31) towards center of
engine (28) and install two belts (32). Slide
alternator (31) back into original position.
(12)
Position locknut (29) on screw (30). Do
not tighten.
|
