|
| |
TM 9-2320-364-20-4
7-13
b.
Installation
NOTE
Perform Step (1) if alternator
mounting bracket was removed.
(1)
Install alternator mounting bracket (3) on
engine (39) with four lockwashers (48) and
screws (47). Tighten screws.
(2)
Position key (46), pulley (43), washer (45)
and locknut (44) on alternator (11).
(3)
Position pulley (43) in soft-jawed vise.
(4)
Tighten locknut (44) on alternator (11) to 120
lb-ft (163 N.m).
(5)
Remove pulley (43) from vise.
Alternator weighs 75 lbs (34 kg).
Use the aid of an assistant to
prevent possible injury to
personnel.
(6)
With the aid of an assistant, position alternator
(11) in alternator mounting bracket (3).
(7)
Position screw (2), washer (42), washer (41),
lockwasher (40) and nut (1) in alternator
mounting bracket (3) and alternator (11).
|
