|
| |
TM 9-2320-364-20-4
7-14
7-3. ALTERNATOR REPLACEMENT (200 AMP) (CONT).
(8)
Position alternator bracket (14), lockwasher
(38) and screw (37) on engine (39).
(9)
Install wire 1275 (36), wire 1435 (35), wire
1815 (34), lockwasher (33) and screw (32) on
alternator (11).
(10)
Tighten screw (32) to 17 lb-ft (23 N.m).
(11)
Remove nut (23), washer (25), washer(s) (if
present) (26), and fuse link (27) with
insulator washer (28) from 24 volt terminal
(31).
(12)
Install wire 1281A (30), wire 1820/1953
(29), fuse link (27) with insulator washer
(28), washer(s) (if removed) (26), washer
(25), lockwasher (24) and nut (23) on 24 volt
terminal (31).
(13)
Tighten nut (23) to 15 lb-ft (20 N.m).
(14)
Remove nut (17) and washer (19) from 12
volt terminal (22).
(15)
Install wire 1274 (21), wire 1860 (20),
lockwasher (18), washer (19) and nut (17) on
12 volt terminal (22).
(16)
Tighten nut (17) to 15 lb-ft (20 N.m).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(17)
Apply electrical sealant to 12 volt terminal
(22), 24 volt terminal (31) and screw (32).
23
26
25
24
28
32
27
17
20
19
18
22
31
21
30
29
38
37
14
39
36
35
34
11
33
|
