|
| |
TM 9-2320-364-20-4
7-34
7-9. DUAL VOLTAGE ALTERNATOR CONTROL (DUVAC) REPLACEMENT
(145 AMP) (CONT).
(18)
Position electric bracket (5) on clean work
bench.
NOTE
Nylon shoulder washers and
insulator plate may not be present
in Step (19).
(19)
Remove two screws (59), lockwashers
(60), washers (61), nylon shoulder washer
(62), DUVAC controller (10) and insulator
plate (63) from electric bracket (5).
Discard lockwashers.
(20)
Remove two screws (64), lockwashers (65),
washers (66) and voltage regulator (38) from
electric bracket (5). Discard lockwashers.
(21)
Remove two screws (67), locknuts (68) and
solenoid switch (44) from solenoid switch
bracket (69). Discard locknuts.
(22)
Remove two screws (70), lockwashers (71),
washers (72), capacitor (73) and solenoid
switch bracket (69), from electric bracket
Discard lockwashers.
(23)
Remove two screws (74), lockwashers
(75), washers (76) and standoff bracket
(30) from electric bracket (5). Discard
lockwashers.
(24)
Remove two screws (77), lockwashers (78),
washers (79) and mounting bracket (80) from
electric bracket (5). Discard lockwashers.
|
