|
| |
TM 9-2320-364-20-4
7-110
7-33. ETHER START AID SWITCH REPLACEMENT (CONT).
b.
Installation.
(1)
Position ether start aid switch (3) in
truck (9).
(2)
Install wire 1487 (8) and screw (7) on ether
start aid switch (3).
(3)
Install wire 1036 (6) and screw (5) on ether
start aid switch (3).
(4)
Bottom out nut (10) against ether start aid
switch (3).
(5)
Install ether start aid switch (3) in
instrument panel (4).
(6)
Install nut (2) and rubber cap (1) on ether
start aid switch (3).
(7)
Tighten nut (10) until nut is tight against
instrument panel (4).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
