|
| |
TM 9-2320-364-20-4
7-111
Materials/Parts
Cable Ties (Item 26, Appendix C)
Tags, Identification (Item 88, Appendix C)
Lockwasher (2) (Item 184, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
7-34. ISOLATOR REPLACEMENT (145 AMP).
a.
Removal.
NOTE
Tag and mark wires prior to removal.
Remove cable ties as required.
(1)
Remove capnut (1), nut (2), lockwasher (3)
and wire 1431 (4) from isolator stud (5).
Discard lockwasher.
(2)
Remove capnut (6), nut (7), lockwasher (8)
and wire 1431 (9) from isolator stud (10).
Discard lockwasher.
(3)
Remove two screws (11) and isolator (12)
from cab wall (13).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Install isolator (12) and two screws (11) on
cab wall (13).
(2)
Install wire 1431 (9), lockwasher (8), nut (7)
and capnut (6) on isolator stud (10).
(3)
Install wire 1431 (4), lockwasher (3), nut (2)
and capnut (1) on isolator stud (5).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
