|
| |
TM 9-2320-364-20-4
7-127
NOTE
Tag and mark wires prior to
removal.
Remove cable ties as
required.
(2)
Remove wire 1435 (4) from terminal (5),
wire 1469 (6) from terminal (7) and wire
1461 (8) from terminal (9).
(3)
Remove collar (10), washer (11), sealing
ring (12) and wires 1435 (4), 1469 (6) and
1461 (8) from junction box (3).
(4)
Remove two screws (13), lockwashers (14) and plate (15) from two clamp halves (16). Discard
lockwashers.
(5)
Remove two clamp halves (16) with proximity switch (17) as an assembly from proximity switch
mounting plate (18).
|
