|
| |
TM 9-2320-364-20-4
7-128
7-39. PROXIMITY SWITCH REPLACEMENT/ADJUSTMENT (MAIN FRAME
DOWN) (CONT).
NOTE
Lockwashers may or may not
be used in Step (6).
There may only be one nut
used in Step (6).
(6)
Remove nut (19), lockwasher (20), two
clamp halves (16), lockwasher (21) and
nut (22) from proximity switch (17).
Discard lockwashers.
(7)
Remove two locknuts (23), screws (24),
four washers (25) and proximity switch
mounting plate (18) from middle frame (26).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Position proximity switch mounting plate
(18), four washers (25), two screws (24) and
locknuts (23) on middle frame (26).
|
