|
| |
TM 9-2320-364-20-4
7-129
NOTE
If lockwashers are not used
in Step (2), serrated side of
nuts face clamp.
There may only be one nut
used in Step (2).
(2)
Position nut (22), lockwasher (21), two
clamp halves (16), lockwasher (20) and nut
(19) on proximity switch (17).
(3)
Position proximity switch (17), with two
clamp halves (16) as an assembly, on
proximity switch mounting plate (18) with
plate (15), two lockwashers (14) and screws
(13).
NOTE
Wire numbers on harnesses are positioned on terminal strip as indicated in chart.
(4)
Install wires 1461 (8), 1469 (6) and 1435 (4) in junction box (3) with sealing ring (12), washer (11) and
collar (10).
(5)
Install wire 1461 (8) on terminal (9), wire 1469 (6) on terminal (7) and wire 1435 (4) on terminal (5).
|
