|
| |
TM 9-2320-364-20-4
7-147
NOTE
Tag and mark electrical wires and cables before disassembly.
Remove cable ties as necessary.
Perform Steps (8) through (12) for right hand proximity switch.
Perform Steps (13) through (17) for left hand proximity switch.
(8)
Remove screw (14) and black wire (15) from bus bar (16) at terminal 4 (17).
(9)
Remove screw (14) and brown wire (18) from bus bar (16) at terminal 20 (19).
(10)
Disconnect blue wire (20) from top of ground strip (21) at terminal 2 (22).
(11)
Remove cover (23), washer (24), grommet (25) and cable (26) from junction box (13).
(12)
Remove grommet (9) from cable (26).
|
