|
| |
TM 9-2320-364-20-4
7-156
7-45. HEAD LIGHT ASSEMBLY REPLACEMENT (CONT).
Perform Step (6) for right side only.
(6)
Open glove box door (11) and remove six locknuts (12), screws (13) and glove box (14) from right side
of dash (15). Discard locknuts.
NOTE
Right side and left side headlight assemblies are removed the same way. Right side is shown.
(7)
Disconnect wire 1007 (16) from
connector (17) on head light assembly (3).
(8)
Disconnect wire 1006 (18) from
connector (19) on head light assembly (3).
(9)
Disconnect wire 1435 (20) from
connector (21) on head light assembly (3).
(10)
With the aid of an assistant, remove three
nuts (22) and lockwashers (23) from
studs (24) at rear of head light assembly
(3). Discard lockwashers.
|
