|
| |
TM 9-2320-364-20-4
7-158
7-45. HEAD LIGHT ASSEMBLY REPLACEMENT (CONT).
NOTE
Perform Step (7) for right side only.
(7)
Install glove box (14) under right side of dash (15) with six screws (13) and locknuts (12). Close glove
box door (11).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and
are harmful to skin and clothing.
To avoid injury or death, keep
away from open fire and use
in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or
clothing,wash immediately with
soap and water.
(8)
Apply corrosion preventive compound to
connectors on wires 1018 (5), 1017 (7) and
1091 (9).
(9)
Connect wire 1018 (5) to connector (6) on
head light assembly (3).
(10)
Connect wire 1017 (7) to connector (8) on
head light assembly (3).
(11)
Connect wire 1091 (9) to connector (10) on
head light assembly (3).
(12)
Install head lamp (4) in head light
assembly (3).
(13)
Install head lamp retaining ring (2) in head
light assembly (3) with three screws (1).
|
