|
| |
TM 9-2320-364-20-4
7-168
7-47. REAR COMPOSITE LIGHT AND BRACKET REPAIR (CONT).
d.
Assembly.
Corrosion inhibitor contains
alkali. Do not get in eyes; wear
goggles/safety glasses when
using. Avoid contact with skin. In
case of contact, immediately
wash area with soap and water. If
eyes are contacted, flush eyes
with large amounts of water for
at least 15 minutes and get
immediate medical attention.
(1)
Apply anti-corrosion silicone compound to
inside of blackout brake lamp socket (15),
blackout tail lamp socket (11), and two
sockets (7) and (8).
(2)
Position blackout brake lamp (13) in
blackout brake lamp socket (15).
Turning base screw more than
necessary to install lamp
assembly could damage wires
and/or blackout light assembly.
(3)
Push in and rotate blackout brake lamp base
screw (14) clockwise to secure lamp in
blackout brake lamp socket (15).
(4)
Close blackout brake lamp door (12) on blackout lamp (13).
(5)
Position blackout tail lamp (10) in blackout
tail lamp socket (11).
Turning base screw more than
necessary to install lamp
assembly could damage wires
and/or blackout light assembly.
(6)
Push in and rotate blackout tail lamp base
screw (9) clockwise to secure lamp in
blackout tail lamp socket (11).
(7)
Push in and install two lamps (5) and (6) in
lamp sockets (7) and (8).
(8)
Install preformed packing (3), composite
light cover (2) and six screws (1) in
composite light housing (4).
|
