|
| |
TM 9-2320-364-20-4
7-171
Materials/Parts
Cable Tie (Item 26, Appendix C)
Silicone Compound, Anti-Corrosion
(Item 85, Appendix C)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Materials/Parts - Continued
Clamp, Loop (Item 22, Appendix F)
Screw, Self-Tapping (2) (Item 299, Appendix F)
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Goggles, Industrial (Item 30, Appendix G)
7-48. REAR FENDER SIDE MARKER LIGHT REPLACEMENT.
a.
Removal.
NOTE
Left and right side removed the same way. Left side shown.
(1)
Remove and discard cable tie (1) from side marker light wiring harness (2).
NOTE
Loop clamp is removed by first pulling out lock button and then removing loop clamp.
(2)
Remove loop clamp (3) and side marker light wiring harness (2) from rear fender support arm (4).
Discard loop clamp.
(3)
Disconnect connector (5) from side marker light wiring harness (2) at side marker light (6).
|
