|
| |
TM 9-2320-364-20-4
7-172
7-48. REAR FENDER SIDE MARKER LIGHT REPLACEMENT (CONT).
NOTE
Perform Steps (4) through (6) for side marker light with lamp.
Perform Steps (7) through (9) for side marker light with LED.
(4)
Remove two screws (7) and cover (8) from side marker light (6).
(5)
Remove lamp (9) from side marker light socket (10).
(6)
Remove two self-tapping screws (11), side marker light (6) and gasket (12) from rear fender (13).
Discard self-tapping screws.
(7)
Remove two screws (14) and cover (15) from side marker light (16).
(8)
Remove two self-tapping screws (17), side marker light (16) and gasket (18) from fender (19). Discard
self-tapping screws.
(9)
Turn LED (20) counterclockwise 1/4 turn and remove from side marker light (16).
b.
Installation.
NOTE
If an entire marker light assembly is being replaced, new marker light assembly will be an
LED.
Perform Steps (1) through (5) for side marker light with lamp.
Perform Steps (6) through (10) for side marker light with LED.
(1)
Position gasket (12) and side marker light (6) on rear fender (13).
(2)
Install two self-tapping screws (11) and side marker light (6) on rear fender (13).
7
9
8
11
10
12
13
6
14
15
20
16
18
17
19
|
