|
| |
TM 9-2320-364-20-4
7-175
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply sealing compound on threads of two
screws (13).
NOTE
Ground wire may or may not be
present in Step (2).
(2)
With the aid of an assistant, install
bracket (10) inside cab (14) with two
screws (13), ground wire (12) and two
locknuts (11).
(3)
Apply corrosion preventive compound to
terminal end of ground wire (12).
(4)
Install cab light (9) on bracket (10) with two
screws (8).
(5)
Install lamp (7) in cab dome light
assembly (3).
(6)
Connect wire 1153 (4) and wire 1435 (5) to
terminals (6) on cab dome light
assembly (3).
(7)
Install lens cover (2) on cab dome light
assembly (3) with two screws (1).
c.
Follow-On Maintenance
Connect batteries, (Para 7-87).
Check operation, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
