| |
TM 9-2320-364-20-4
7-174
Materials/Parts
Compound, Corrosion Preventive
(Item 34, Appendix C)
Sealing Compound (Item 72, Appendix C)
Tags, Identification (Item 88, Appendix C)
Locknut (2) (Item 106, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Tools and Special Tools
Tool Kit, General Mechanics: Automotive
(Item 74, Appendix G)
7-49. CAB DOME LIGHT ASSEMBLY REPLACEMENT.
a.
Removal.
Tag and mark wires prior to removal.
(1)
Remove two screws (1) and lens cover (2) from cab dome light assembly (3).
(2)
Disconnect wire 1153 (4) and wire 1435 (5) from terminals (6) on cab dome light assembly (3).
(3)
Remove lamp (7) from cab dome light assembly (3).
(4)
Remove two screws (8) and cab dome light (9) from bracket (10).
NOTE
Ground wire may or may not be present in Step (5).
(5)
With the aid of an assistant, remove two locknuts (11), ground wire (12), two screws (13) and bracket
(10) from cab (14). Discard locknuts.
|