|
| |
TM 9-2320-364-20-4
7-194
7-53. REAR MARKER LIGHT ASSEMBLY REPAIR (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing,wash
immediately with soap and water.
(13)
Apply corrosive preventive compound to
wire 1435 (20).
(14)
Connect wire 1012 (5) to wire 489 (3).
(15)
Install push clip (2) and two wires 489 (3)
on rear marker light assembly (4).
(16)
Connect MC90 connector (1).
f.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Check operation of rear marker light
assembly, (TM 9-2320-364-10).
Remove wheel chocks,
(TM 9-2320-364-10).
END OF TASK
|
