|
| |
TM 9-2320-364-20-4
7-207
b.
Installation.
NOTE
Perform Steps (1) through (7) if
ECM mounting bracket was
removed.
(1)
Position ECM mounting bracket (24) on
engine (42).
(2)
Install turbo oil line clamp (41), washer
lockwasher (39) and screw (38) on ECM
mounting bracket (24). Tighten screw 120
156 lb-in (13 to 17 N.m).
(3)
Install turbo boost sensor bracket (37),
washer (36), lockwasher (35) and screw
on ECM mounting bracket (24). Tighten
screw 120 to 156 lb-in (13 to 17 N.m).
(4)
Position washer (33), lockwasher (32)
screw (31) in ECM mounting bracket (24)
(5)
Position washer (30), lockwasher (29)
screw (28) in ECM mounting bracket (8)
(6)
Position washer (27), lockwasher (26)
screw (25) in ECM mounting bracket (24)
(7)
Tighten screws (25), (28) and (31) to 23
26 lb-ft (31 to 35 N.m).
NOTE
Perform Steps (8) through
(10) if ECM was removed.
Washers may or may not be
present in Step (8).
(8)
Install ECM (14), eight mount
cushions (23), four washers (22) and
screws (21) in ECM mounting bracket (24)
Tighten screws 60 to 84 lb-in (7 to 9 N.m).
|
