|
| |
TM 9-2320-364-20-4
7-220
Materials/Parts
Locknut (2) (Item 124, Appendix F)
This task covers:
a. Removal
c. Adjustment
b. Installation
d. Follow-On Maintenance
INITIAL SETUP
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
7-59. TURBO THROTTLE SWITCH REPLACEMENT/ADJUSTMENT.
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
a.
Removal.
(1)
Disconnect MC127 connector (1).
(2)
Remove two locknuts (2), washers (3), screws (4) and switch assembly (5) from throttle switch bracket
(6). Discard locknuts.
NOTE
Perform Step (3) if throttle switch bracket is damaged.
(3)
Remove two screws (7) and throttle switch bracket (6) from cab frame (8).
b.
Installation.
NOTE
Perform Step (1) if bracket was removed.
(1)
Position throttle switch bracket (6) on cab frame (8) with two screws (7).
(2)
Install switch assembly (5) on throttle switch bracket (6) with two screws (4), washers (3) and locknuts (2).
(3)
Connect MC127 connector (1).
|
