| |
TM 9-2320-364-20-4
7-236
7-65. WATER TEMPERATURE GAGE/FAN CONTROL SENSORS
REPLACEMENT (CONT).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap
water.
Do not overtighten fan control
sensor.
NOTE
Perform Steps (1) through
(3) to install fan control
sensor.
Perform Steps (4) and (5)
to install water temperature
gage sensor.
(1)
Apply sealing compound to threads of fan
control sensor (14).
(2)
Install fan control sensor (14) in left
thermostat housing (12).
(3)
Connect MC61 connector (13).
|