|
| |
TM 9-2320-364-20-4
7-254
7-73. TACHOMETER DRIVE ASSEMBLY REPLACEMENT (CONT).
(2)
Disconnect MC41 connector (6).
(3)
Remove tachometer drive sending unit (7) from tachometer drive housing (8).
(4)
Remove two locknuts (9), screws (10) and plate (11) from power pack frame (12). Discard locknuts.
Do not remove screws securing fan brace. Removing screws will cause fan brace to drop
and may result in severe injury or death to personnel.
(5)
Remove two locknuts (13) and brackets (14) from screws (15).
(6)
Position two locknuts (13) on screws (15).
(7)
Remove hose 2312 (16) from adapter (17).
|
