|
| |
TM 9-2320-364-20-4
7-255
(8)
Loosen jam nut (18) on screw (19).
(9)
Loosen screw (19) and remove clamp (20)
from blower (21).
(10)
Remove and discard tachometer drive
housing (8) and gasket (22) from
blower (21).
b.
Installation.
(1)
Install gasket (22) and tachometer drive
housing (8) on blower (21).
(2)
Install clamp (20) on blower (21).
(3)
Tighten screw (19) on clamp (20).
(4)
Tighten jam nut (18) on screw (19).
(5)
Install hose (16) in adapter (17).
Do not remove screws securing fan brace. Removing screws will cause fan brace to drop
and may result in severe injury or death to personnel.
(6)
Remove two locknuts (13) from screws (15). Discard locknuts.
(7)
Install two brackets (14) and locknuts (13) on screws (15).
(8)
Install plate (11), two screws (10) and locknuts (9) in power pack frame (12). Tighten locknuts securely.
|
