|
| |
TM 9-2320-364-20-4
7-269
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply sealing compound to threads of
reducer (9).
(2)
Install reducer (9) in thermostat
housing (10).
(3)
Apply sealing compound to threads of water
temperature switch (8).
(4)
Install temperature switch (8) in reducer
bushing (9).
(5)
Connect MC128 connector (7).
(6)
Install water temperature sending unit (5) in
engine block (6).
(7)
Install washer (4), wire 1147 (3),
lockwasher (2) and nut (1) on water
temperature sending unit (5). Tighten nut
to 9 lb-in (1 N.m).
(8)
Apply electrical sealant to terminal on water
temperature sending unit (5).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Fill cooling system, (Para 6-4).
Start engine, (TM 9-2320-364-10).
Check for coolant leaks, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Install cab engine access panel, (Para 17-24).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
