|
| |
TM 9-2320-364-20-4
7-280
Materials/Parts
Compound, Corrosion Preventive
(Item 34, Appendix C)
Lockwasher (2) (Item 185, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
7-85. ELECTRIC HORN REPLACEMENT.
a.
Removal.
(1)
Disconnect wire 1168 (1) and wire 1435 (2)
from electric horn (3).
(2)
Remove two screws (4), lockwashers (5) and
electric horn (3) from horn mount (6).
Discard lockwashers.
b.
Installation.
(1)
Install electric horn (3) on horn mount (6)
using two screws (4) and lockwashers (5).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(2)
Apply corrosion preventive compound on
wire 1168 (1) and wire 1435 (2).
(3)
Install wire 1168 (1) and wire 1435 (2) on
electric horn (3).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
