|
| |
TM 9-2320-364-20-4
7-281
Material/Parts
Cable Ties (Item 25, Appendix C)
Tags, Identification (Item 88, Appendix C)
Locknut (4) (Item 106, Appendix F)
Locknut (2) (Item 133, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Rear hard lift assembly removed, (Para 15-8)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
7-86. REVERSE ALARM REPLACEMENT.
a.
Removal.
Tag and mark wires prior to removal.
Connectors are removed by gently pulling up on tab on connector.
Remove cable ties as required.
(1)
Disconnect MC77 connector (1) and MC124 connector (2).
(2)
Remove locknut (3), screw (4), cushion clip (5) and reverse alarm wire harness (6) from truck frame (7).
Discard locknut.
(3)
With the aid of an assistant, remove locknut (8), screw (9), two cushion clips (10) and reverse alarm wire
harness (6) from bracket (11). Discard locknut.
|
