|
| |
TM 9-2320-364-20-4
7-282
7-86. REVERSE ALARM REPLACEMENT (CONT).
(4)
With the aid of an assistant, remove two
locknuts (12), screws (13), mounting
plate (14) and reverse alarm (15) from truck
frame (7). Discard locknuts.
(5)
Remove two locknuts (16), screws (17) and
mounting plate (14) from reverse alarm (15).
Discard locknuts.
(6)
Remove nut (18) and wire 1718 (19) from
positive stud (20) of reverse alarm (15).
(7)
Remove nut (18) and wire 1435 (21) from
negative stud (22) of reverse alarm (15).
(8)
Remove reverse alarm capacitor (23) from
positive stud (20) and negative stud (22) of
reverse alarm (15).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Install reverse alarm capacitor (23) on
positive stud (20) and negative stud (22) of
reverse alarm (15).
(2)
Install wire 1435 (21) and nut (18) on
negative stud (22) of reverse alarm (15).
(3)
Install wire 1718 (19) and nut (18) on
positive stud (20) of reverse alarm (15).
(4)
Install mounting plate (14), two screws (17)
and locknuts (16) on reverse alarm (15).
|
