|
| |
TM 9-2320-364-20-4
7-286
7-87. BATTERY DISCONNECTION/CONNECTION (CONT).
NOTE
Install cable ties as required.
(2)
Install two terminals (2) on positive posts (13) and (14) on batteries one (9) and two (10) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m).
(3)
Install two terminals (2) on positive posts (11) and (12) on batteries three (5) and four (6) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m).
(4)
Install two terminals (2) on negative posts (7) and (8) on batteries one (9) and two (10) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m).
(5)
Install two terminals (2) on negative posts (3) and (4) on batteries three (5) and four (6) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m).
Corrosion inhibitor contains alkali. Do not get in eyes; wear goggles/safety glasses when
using. Avoid contact with skin. In case of contact, immediately wash area with soap and
water. If eyes are contacted, flush eyes with large amounts of water for at least 15 minutes
and get immediate medical attention.
(6)
Apply anticorrosion compound to positive posts (11), (12), (13) and (14) and negative posts (3), (4), (7)
and (8) and eight terminals (2).
c.
Follow-On Maintenance:
Install battery box cover, (TM 9-2320-364-10).
Connect arctic kit batteries (if equipped), (Para 21-11).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
