|
| |
TM 9-2320-364-20-4
7-327
(3)
Remove nut (5), lockwasher (6), diode (8),
capacitor (10) and wire 1435 (11) from
magnetic switch terminal (12). Discard
lockwasher.
(4)
Remove nut (1), lockwasher (2), wire
1430 (13) and capacitor (10) from magnetic
switch terminal (14). Discard lockwasher
(5)
Remove two screws (15), wire 1435 (16)
magnetic switch (17) from electronic control
box (18). Discard screws.
b.
Installation.
(1)
Install magnetic switch (17), wire 1435
with two screws (15) on electronic control
box (18).
(2)
Position capacitor (10), wire 1430 (13),
lockwasher (2) and nut (1) on magnetic
switch terminal (14).
(3)
Tighten nut (1) to 30 to 35 lb-in (3 to 4 N.
|
