|
| |
TM 9-2320-364-20-4
7-328
7-92. 12V MAGNETIC SWITCH REPLACEMENT (CONT).
(4)
Position wire 1435 (11), capacitor (10),
diode (8), lockwasher (6) and nut (5) on
magnetic switch terminal (12).
(5)
Tighten nut (5) to 10 to 15 lb-in (1 to 2 N.m).
(6)
Position diode (8), wire 1189 (7),
lockwasher (6) and nut (5) on magnetic
switch terminal (9).
(7)
Tighten nut (5) to 10 to 15 lb-in (1 to 2 N.m).
(8)
Position wire 1175 (3), lockwasher (2) and
nut (1) on magnetic switch terminal (4).
(9)
Tighten nut (1) to 30 to 35 lb-in (3 to 4 N.m).
c.
Follow-On Maintenance:
Install Electronic Control Box (ECB) cover,
(Para 17-22).
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
3
2
1
4
5
6
7
8
9
|
