|
| |
TM 9-2320-364-20-4
7-361
h.
22-Pin Connector Repair.
(1)
Disassembly.
(a)
Loosen center screw (1) and remove
harness connector (2) from cab
connector (3).
NOTE
For access to wires on cab
connector it may be necessary to
perform Step (b) to remove
connector from dash.
(b)
Remove two locknuts (4), screws (5)
and cab connector (3) from connector
bracket (6).
NOTE
Cab connectors and harness
connectors are repaired the same
way. Harness connector is
shown.
(c)
Remove secondary lock(s) (7) from
connector (3).
(d)
Remove wire (8), cable seal (9) and
electrical contact (10) from connector
(3) with contact socket removal tool.
(e)
Cut and remove cable seal (9) and
electrical contact (10) from wire (8).
|
